| For further sizes and specifications in the KASTOflex range click on the technical data sheet download(s) above. |
| Diameter of saw blade |
350 mm
400 mm
450 mm
|
Ø 13.78 in.
Ø 15.75 in.
Ø 17.72 in. |
| Special flange for saw blade diameter |
350 mm |
13.78 in. |
| Cutting range with saw blade diameter |
450 mm |
17.72 in. |
90° round
90° flat (w x h)
90° square (w x h)
|
150 mm
200 x 100 mm
140 x 140 mm |
Ø 5.91 in.
7.87 x 3.94 in.
5.51 x 5.51 in. |
45° round
45° round (w x h)
45° round (w x h) |
145 mm
160 x 80 mm
120 x 120 mm |
Ø 5.71 in.
6.30 x 3.15 in.
4.72 x 4.72 in. |
60° round
60° round (w x h)
60° round (w x h) |
115 mm
120 x 60 mm
100 x 100 mm |
Ø 4.53 in.
4.72 x 2.36 in.
3.94 x 3.94 in. |
| Minimum material height with flat material |
8 mm |
0.31 in. |
| Material feed length, individual cut at 90° |
2000 mm |
78.74 in. |
| Material feed length, individual cut at 45° approx. |
1975 mm |
77.76 in. |
| Remnant length in automatic cycle at 90° |
35 mm |
1.38 in. |
| Remnant length in automatic cycle at 45° |
95 mm |
3.74 in. |
| Direct entry of measures up to |
9999 mm |
393.66 in. |
| Max. material bending on 19.68’(6 m) length |
12 mm |
0.47 in. |
| Pole changing cutting speed |
12/24 m/min |
39.36 / 78.72 '/min |
| Infinitely variable cutting speed (option) |
10 - 60 m/min |
32.80 - 196.80 '/min |
| Saw feed speed range |
16 - 600 mm/min |
0.63 - 23.62 in./min |
| Rapid return of the saw blade |
2500 mm/min |
98.43 in./min |
| Material feed speed |
0 - 30 m/min |
0 - 98.40 '/min |
| Dimensions |
| Length |
3270 mm |
128.74 in. |
| Width |
1200 mm |
47.24 in. |
| Height |
1880 mm |
74.02 in. |
| Weight of machine approx. |
2500 kg |
5,500 lbs |
| Energy Supply |
| Mains voltage |
In accordance with EN 60204
220/440V three-phase current
Control voltage 24 V-DC
The customer will be notified of the connection value in kVA after the scope of supply has been finalized.
On request other voltages for an extra charge |
| Mains frequency |
60 Hz |
| Type of mains |
TN mains according to IEC 364/VDE 0100
The power is supplied from the mains to the switching cabinets including advance fusing by the
customer. The position of the switch cabinet is to be seen from the layout. |
Protective measures
against indirect contact |
Over-current protector (zero balancing).
The mains supply of the operator (size and characteristic of the main fuse selected as well as the total
impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shutdown time in the event of an error is not exceeded.
The use of a differential current switch in the mains incoming supply is not permitted. |
| Safety requirements |
The offered machine corresponds with the valid safety requirements according to DIN EN ISO 12100-
1, DIN EN ISO 12100-2 |
| Painting |
Machine RAL 7035, light grey, structural painting |
