Fully automatic circular sawing machine of solid construction - a consistent solution for all straight and miter cutting of tubes and sections in the workshop.
| Cutting Range |
90°round solid material
90° round tubes
90° square tubes
90° square (W xH) sections
|
3.9 in.
4.7 in.
3.9 x 3.9 in.
6.7 x3.9 in. |
100 mm
120 mm
100 x 100 mm
170 x100 mm |
In semi-automatic operation miter cutting on both sides +/- 45°
In automatic operation miter cutting only on one side + 45° |
±45° round solid material
±45° round tubes
±45° square tubes
±45° flat (W xH ) sections
|
3.9 in.
4.7 in.
3.9 in. x 3.9 in.
5.1 x 3.9 in. |
100 mm
120 mm
100 x 100 mm
130 x 100 mm |
| Shortest length of residual piece, single cut at 90° |
1.18 in. |
30 mm |
| Shortest length of residual piece, automatic operation at 90° |
10.24 in. |
260 mm |
| Dimensions and weight |
| Length |
59.1 in |
1500 mm |
| Width |
55.1 in. |
1400 mm |
| Height |
74.8 in. |
1900 mm |
| Material support height |
37.4 in. |
950 mm |
| Total weight |
2155 lbs |
980 kg |
| Power characteristics |
| Total Power |
4.8 HP |
5.0 kW |
| Power Saw Motor |
3.5 HP and 4.6 HP |
2.6 kW and 3.5 kW |
| Voltage |
220/240 V |
60 Hz |
| Cutting speed |
80/160 FPM or 40/80 FPM |
25/50 m/min or 12/25 m/min |
| or infinitely adjustable |
39.36 – 196.80 FPM |
12-60 m/min |
| Material feed, individual cut |
22 in. |
560 mm |
| Multiple feed |
393.66 in. |
9999 mm |
| Dimensions of saw blade |
13.8 x 0.10 x 1.3 iin. |
350 x 2.5 x 32 mm |
| Electrical equipment |
In accordance with VDE-standards, DIN EN 60204.
Supply voltage 220/440 Volt, 60 Hz, 3 phase
Control voltage 24 V DC
Upon request other voltages at additional cost. |
| Safety requirements |
The machine is offered with reference to the valid safety requirements according to DIN EN
ISO 12100-1, DIN EN ISO 12100-2 |
| Colour |
Light grey RAL 7035, Structural painting |
