Fully hydraulic, vertical high-performance bandsawing machine of robust construction for mitre cuts, for cutting of profiles, tubes and solid material in 90° cut and in mitre cut on both sides from + 60° to - 45° or, as an option to ± 60°. The precise mitre cut adjustment is infinitely preselectable, with digital display and automatic clamping. The solid turning point at the intersection of material support edge and saw blade provides an accurate dimensional gauge line for 90° and mitre cutting.
| Cutting Range |
| 90° round |
18.11 in. |
460 mm |
90° flat
(width x height) |
18.11 x 23.62 in. |
460 x 600 mm |
| 90° square |
18.11 x 18.11 in. |
460 x 460 mm |
| ± 45 round |
16.73 in. |
425 mm |
± 45° flat
(width x height) |
18.11 x 16.73 in. |
460 x 425 mm |
| ± 45° square |
16.73 x 16.73 in. |
425 x 425 mm |
| + 60° round |
11.81 in. |
300 mm |
+ 60° flat
(width x height) |
18.11 x 11.81 in. |
460 x 300 mm |
| + 60° square |
11.81 x 11.81 in. |
300 x 300 mm |
| 60° round option! |
11.81 in. |
300 mm |
60° flat
(width x height) option! |
18.11 x 11.81 in. |
460 x 300 mm |
| Cutting range - 60° square option! |
11.81 x 11.81 in. |
300 x 300 mm |
| Shortest length of cut-off piece |
1.97 in. |
50 mm |
| Smallest diameter to be |
0.79 in. |
20 mm |
| Dimensions and weight |
| Length |
111.02 in. |
2820 mm |
| Width |
73.23 in. |
1860 mm |
| Height |
106.30 in. |
2700 mm |
| Material support height |
39.37 in. |
1000 mm |
| Weight |
6820 lbs. |
3100 kg |
| Performance characteristics |
| Power of saw motor, frequency adjusted |
5.28 HP |
4 kW |
| Total connected load |
9.24 HP |
7 kW |
Machine roller conveyor,
length x width |
66.93 x 18.11 in. |
1700 x 460 mm |
| Ball-bearing massive transport rollers |
8 units |
|
| Diameter of rollers |
2.76 in. |
70 mm |
| Distances between rollers |
7.87 in. |
200 mm |
| Cutting speed, infinitely variable |
39.36 - 393.60 ft/min |
12 - 120 m/min |
| Dimensions of saw blade |
221.65 x 1.61 x 0.05 in. |
5630 x 41 x 1.3 mm |
| Cutting feed |
hydraulically controllable |
| Material clamping |
hydraulic |
| Saw blade cleaning |
by easy to exchange wire brush,
driven proportionally to main drive |
Coolant (micro-spray lubrication system):
liquid, |
For cutting of profiles and tubes, consisting of: compressed-air reservoir incl. 0.263 gal (1 l) of spray compressed-air control unit, sight glass for liquid, electric level monitoring, electrovalve to control air and liquid supply, adjustable at machine control |
| Electrical equipment |
In accordance with VDE standards, DIN EN 60204 Line voltage 440 Volt 3 ph 60 hZ Control voltage 24 V-DC On request other voltages for an extra charge |
| Type of mains |
TN mains according to IEC 364/VDE 0100 |
| Protective measures against indirect contact |
Over-current protector (zero balancing). The mains supply of the operator (size and characteristic of the main fuse selected as well as the total impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shutdown time in the event of an error is not exceeded. The use of a differential current switch in the mains incoming supply is not permitted. |
| Painting |
Machine RAL 7035, light grey, structural painting |
| Compressed-air supply required |
Approx. 87.60 lbs/sq. in./5.28 gal/min (6 bar/20 l/min) |
