Sawing Machines
|
KASTO tec bandsaw
KASTOtec A3, A4 & A5 Fully hydraulic and automatic high-performance bandsawing machine of robust construction, with saw blade moving parallel in horizontal direction, for cutting of round, square and flat material, of tubes and profiles of all qualities, particularly for tool steels and material which is difficult to cut such as titanium, Hastelloy, Inconel etc. The optimum use of carbide or bi-metal blades has been taken into account rigorously when this machine has been designed.
For further sizes and specifications in the KASTOtec range click on the technical data sheet downloads above. |
| Cutting Range |
| Round |
430 mm |
| Square H x W |
430 x 430 mm |
| Flat H x W |
430 x 430 mm |
| Bundle H x W (option) |
430 x 430 mm |
| Clamping range |
0 -430 mm |
| Smallest size to be cut |
10 x 10 mm |
| Shortest length of cut-off piece |
6 mm |
| Shortest remnant length in automatic operation, possible only if the material has a perfect geometric surface |
35 mm |
| Shortest remnant length individual cut |
10 mm |
| Automatic material feed length, single stroke |
600 mm |
| Automatic material feed length, multiple stroke |
9999 mm |
| Length approx. |
2140 mm |
| Width incl. chip conveyor |
4610 mm |
| Height (saw frame in lowest position) approx. |
2195 mm |
| Height (saw frame in highest position) approx. |
2410 mm |
| Material support height |
700 mm |
| Total weight |
4300 kg |
| Total power |
9.5 kW |
| Power of saw motor |
5.5 kW |
| Power at running wheel |
5.23 kW |
| Cutting speed infinitely variable with 50 or 60 Hz |
12 - 120 m/min |
| Clamping power of machine vice |
2000 - 8000 N |
| Clamping power of feed vice |
2000 - 15000 N |
| Volume of coolant tank |
150 I |
| Capacity of coolant pump with 3 m pump lift |
25 I/min |
| Dimensions of saw blade |
6830 x 41 x 1.3 mm |
| On request (to be mentioned in the order) |
6830 x 54 x 1.3 mm |
| Energy Supply |
| Mains voltage |
In accordance with EN 60204
400 V three-phase current (-10 %, +6 %)
Control voltage 24 V-DC
The customer will be notified of the connection value in kVA after the scope of supply has been finalized.
On request other voltages for an extra charge |
| Mains frequency |
50 Hz (-1 %, +1 %; transient –2 %, +2 %) |
| Ttpe of mains |
TN mains according to IEC 364/VDE 0100
The power is supplied from the mains to the switching cabinets including advance fusing by the customer. The position of the switch cabinet is to be seen from the layout. |
Protective measures
against indirect contact |
Over-current protector (zero balancing).
The mains supply of the operator (size and characteristic of the main fuse selected as well as the total impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shutdown time in the event of an error is not exceeded.
The use of a differential current switch in the mains incoming supply is not permitted. |
| Safety requirements |
The offered machine corresponds with the valid safety requirements according to DIN EN ISO 12100-1, DIN EN ISO 12100-2 |
| Painting |
Machine RAL 7035, light grey, structural painting
Saw unit RAL 2003, pastel-orange, structural painting |
| Compressed-air supply |
Approx. 6 bar/20 l/min required |
|
Brochure download
|
All KASTO brochures
|
|
