| Cutting range round |
260 mm |
| Cutting range square |
260 x 260 mm |
| Cutting range bundle width |
150 - 260 mm |
| Cutting range bundle height |
0 -200 mm |
| Clamping range |
0 -260 mm |
| Smallest size to be cut |
Ø 10 mm |
| Shortest length of cut-off piece |
5 mm |
| Minimal remnant length, automatic operation |
110 mm |
| Minimal remnant length, single cut |
10 mm |
| Automatic feed length, single stroke |
680 mm |
| Multiple feed length |
9999 mm |
| Overall Dimensions |
| Length |
1670 mm |
| Width |
2080 mm |
| Height |
2130 mm |
| Material support height |
950 mm |
| Total weight |
2200 kg |
| Total power |
9.5 kW |
| Power of saw motor |
5.5 kW |
| Power of material feed motor |
0.75 kW |
| Cutting speed infinitely variable |
15 - 125 mm |
| Clamping force of machine vice |
1100 - 6800 N |
| Clamping force of feed vice |
1100 - 6800 N |
| Volume of coolant tank approx. |
110 L |
| Coolant pump capacity with a pump lift of 4 m |
50 L/min |
| Dimensions of saw blade |
4115 x 41 x1.3 mm |
| Energy Suppy |
| Mains voltage: |
In accordance with EN 60204
400 V three-phase current (-10 %, +6 %)
Control voltage 24 V-DC
The customer will be notified of the connection value in kVA after the scope of supply has been finalized.
On request other voltages for an extra charge |
| Mains frequency: |
50 Hz (-1 %, +1 %; transient –2 %, +2 %) |
| Type of mains: |
TN mains according to IEC 364/VDE 0100
The power is supplied from the mains to the switching cabinets including advance fusing by the customer. The position of the switch cabinet is to be seen from the layout. |
Protective measures
against indirect contact: |
Over-current protector (zero balancing).
The mains supply of the operator (size and characteristic of the main fuse selected as well as the total impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shutdown time in the event of an error is not exceeded.
The use of a differential current switch in the mains incoming supply is not permitted. |
| Safety requirements: |
The offered machine corresponds with the valid safety requirements according to DIN EN ISO 12100-1, DIN EN ISO 12100-2 |
| Painting: |
Machine RAL 7035, light grey, structural painting |
