The large bandsaws of the KASTOhba series combine modern machine tool design and KASTO's extensive exerience in the efficient, cost-effective cutting of large workpieces. Several machine sizes cover the cutting ranges from 26"x26" (660 x 660 mm) to 52"x68" (1320 x 1720 mm). Saws are available as either semi-automatic or fully automatic.
For further sizes and specifications in the KASTOhba range click on the technical data sheet download(s) above. |
| Cutting Range |
| Round |
33.86 in. |
860 mm |
| Square H x W |
33.86 x 33.6 in. |
860 x 860 mm |
| Flat H x W |
33.86 x 41.73 in. |
860 x 1060 mm |
| Clamping range |
0-41.73 in. |
0-1060 mm |
| Smallest size to be cut |
Ø0.79 in. |
20 mm |
| Shortest length of cut-off piece |
0.39 in. |
10 mm |
| Overall Dimensions |
| Length approx. |
227.17 in. |
5770 mm |
| Width without chip conveyor approx. |
200.79 in. |
5100 mm |
| Width with chip conveyor approx. |
244.09 in. |
6200 mm |
| Height (head in lowered position) approx. |
118.11 in. |
3000 mm |
| Height (head in highest position) approx. |
122.05 in. |
3100 mm |
| Size of table (length x width) |
98.43 x43.31 in. |
2500 x 1100 mm |
| Moving distance |
82.68 in. |
2100 mm |
| Meterial support height |
27.56 in. |
700 mm |
| Total weight |
9,040 Ibs. |
13,200 kg |
| Total power |
23.76 HP |
18 kW |
| Saw motor |
14.52 HP |
11 kW |
| Automatic feed length, single stroke |
82.68 in. |
2100 mm |
| Minimal remnant length, individual cut |
0.79 in. |
20 mm |
| Minimal remnant length, automatic operation |
3.94 in. |
100 mm |
| Cutting speed infinitely variable |
39.36 – 295.20 ft/min |
12 – 90 m/min |
| Cutting speed infinitely variable |
|
|
| Hydraulic material feed |
|
|
| Hydraulic clamping feed |
|
|
| Tension Force |
| Machine vice |
2200 -8800 Ibs |
10000 40000 N |
| Dimensions of saw blade |
403.94 x 2.64 x 0.06 in. |
10260 x 67 x 1.6 mm |
| On request (to be mentioned in the order) |
403.94 x 3.15 x 0.06 in. |
10260 x 80 x 1.6 mm |
| Saw blade guide |
Carbide tipped, excchangeable |
| Saw blade tension |
Hydraulic |
| Cleaning of saw blade |
By a brush which is easy to exchange, motor-driven |
| Cooloant |
Coolant supply through 3 nozzles, volume of coolant tank approx. 52.80 gal. (200 l), pump capacity
6.60 gal/min (25 l/min) with a pump lift of 16.40’ (5 m) |
| Energy Supply |
| Mains voltage |
In accordance with EN 60204
220/440 V three-phase current (-10 %, +6 %)
Control voltage 24 V-DC
The customer will be notified of the connection value in kVA after the scope of supply has been
finalized.
On request other voltages for an extra charge |
| Mains frequency |
60 Hz (-1 %, +1 %; transient –2 %, +2 %) |
| Ttpe of mains |
TN mains according to IEC 364/VDE 0100
The power is supplied from the mains to the switching cabinets including advance fusing by the
customer. The position of the switch cabinet is to be seen from the layout. |
Protective measures
against indirect contact |
Over-current protector (zero balancing).
The mains supply of the operator (size and characteristic of the main fuse selected as well as the total
impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a
way that the permissible shutdown time in the event of an error is not exceeded.
The use of a differential current switch in the mains incoming supply is not permitted. |
| Safety requirements |
The offered machine corresponds with the valid safety requirements according to DIN EN ISO 12100-
1, DIN EN ISO 12100-2 |
| Painting |
Machine RAL 7035, light grey, structural painting
Blade guide arms RAL 2003, pastel-orange, structural painting |
| Compressed-air supply |
Approx. 87.60 PSI/5.28 gal/min (6 bar/20 l/min) required |
