By the long cut working method, the KASTO block bandsawing machine allows to cut square or flat materials with different sizes of cross section from rolled blocks or rolled plates.
By using bi-metal blades or carbide tipped blades, all material qualities, also material which is difficult to cut such as titanium, Hastelloy, Inconel, can be cut with high cutting performances.
| Power of saw motor |
4.0 kW |
| Total power |
6.0 kW |
| Cutting speed infinitely variable |
17-110 m/min |
Dimensions of saw blade
or |
5450 x 41 x 1.3 mm
5450 x 54 x 1.3 mm |
| Saw feed infinitely variable |
1.0-250 mm/min |
| Rapid motion |
8 m/min |
| Cutting Length 2100 mm |
| Supporting surface of front table (Length x Width) |
2100 x 660 mm |
| Supporting surface of back table (Length x Width) |
2100 x 660 mm |
| Max. table load outer table |
3500 kg |
| Max. table load inner table |
3500 kg |
Cutting height without
BandContol |
580 mm |
| Cutting height with BandContol |
540 mm |
| Max. cutting length |
2100 mm |
| Cutting depth (without measuring stops ) |
660 mm |
| Length incl. chip conveyor |
4560 mm |
| Width incl. grating |
2610 mm |
| Height without laser approx. |
3200 mm |
| Height with laser approx. |
3200 mm |
| Height of table support |
1200 mm |
| Toatal weight |
7500 kg |
| Cutting Length 3100 mm |
| Supporting surface of front table (Length x Width) |
3100 x 660 mm |
| Supporting surface of back table (Length x Width) |
3100 x 660 mm |
| Max. table load outer table |
6000 kg |
| Max. table load inner table |
5000 kg |
Cutting height without
BandContol |
580 mm |
| Cutting height with BandContol |
540 mm |
| Max. cutting length |
3100 mm |
| Cutting depth (without measuring stops ) |
660 mm |
| Length incl. chip conveyor |
5560 mm |
| Width incl. grating |
2610 mm |
| Height without laser approx. |
3200 mm |
| Height with laser approx. |
3200 mm |
| Height of table support |
1200 mm |
| Toatal weight |
8000 kg |
| Cutting Length 4100 mm |
| Supporting surface of front table (Length x Width) |
4100 x 660 mm |
| Supporting surface of back table (Length x Width) |
4100 x 660 mm |
| Max. table load outer table |
6000 kg |
| Max. table load inner table |
4000 kg |
Cutting height without
BandContol |
580 mm |
| Cutting height with BandContol |
540 mm |
| Max. cutting length |
4100 mm |
| Cutting depth (without measuring stops ) |
660 mm |
| Length incl. chip conveyor |
6560 mm |
| Width incl. grating |
2610 mm |
| Height without laser approx. |
3200 mm |
| Height with laser approx. |
3200 mm |
| Height of table support |
1200 mm |
| Toatal weight |
8500 kg |
| Energy Supply |
| Mains Voltage: |
In accordance with EN 60204
400 V three-phase current (-10 %, +6 %)
Control voltage 24 V-DC
The customer will be notified of the connection value in kVA after the scope of supply has been finalized.
On request other voltages for an extra charge |
| Mains frequency: |
50 Hz (-1 %, +1 %; transient –2 %, +2 %) |
| Type of Mains: |
TN mains according to IEC 364/VDE 0100
The power is supplied from the mains to the switching cabinets including advance fusing by the customer. The position of the switch cabinet is to be seen from the layout. |
| Protective measures against indirect contact: |
Over-current protector (zero balancing).
The mains supply of the operator (size and characteristic of the main fuse selected as well as the total impedance of PE and outer conductor in the supply line to the machine) has to be designed in such a way that the permissible shutdown time in the event of an error is not exceeded.
The use of a differential current switch in the mains incoming supply is not permitted. |
| Safety requirements: |
The offered machine corresponds with the valid safety requirements according to DIN EN ISO 12100-1, DIN EN ISO 12100-2 |
| Painting: |
Machine RAL 7035, light grey, structural painting |
